Tuesday, December 3, 2013

A Brief Analysis of Stoves at the Wood Stove Decathlon

The danger of naming a winner at a competition like this is that the many achievements of the non-winners receive little focus. Here we list the top 6 stoves in each category: Overall Performance, Innovation, Affordability, Particulate Matter Emissions, Efficiency, Market Appeal and Carbon Monoxide Emissions. We try to note the trends between stove classes and the stand out performances of stoves that did not win prizes.

The scoring was done by nine judges. Three of the areas -- PM emissions, efficiency and CO emissions -- were scored only by the testing equipment, meaning the judges had no discretion to change the grade of the stoves for those three areas. Each stove was tested at least two times. For more on scoring see: http://forgreenheat.blogspot.com/2013/11/how-stoves-are-scored.html

OVERALL

1) Woodstock Soapstone
2) Travis
2) Wittus
4) Intercontinental
4) Ecolabel Tile Stove
4) Hwam

Woodstock Soapstone
The Grand prize went to a finely tuned, naturally drafting catalytic wood stove without any electronic controls. In fact, the winning Woodstock Soapstone hybrid is very similar to the design of one of the second place stoves, the Cape Cod by Travis.  Wittus is also a naturally drafting steel stove that has a unique downdraft burn into a lower chamber. Technically, this is a non-cat stove, but its design has little in common with the traditional non-cat stoves on the market today.

The fourth and fifth top overall stoves were masonry stoves, and while they did not take home any prizes (due to their high pricetags and perceived lack of innovation, as the underlying designs and principles are so old), it is clear that they performed extremely well overall.  Two of the top 6 stoves overall had electronic sensors and computers.

INNOVATION
HWAM
1) HWAM
2) Wittus
3) IntensiFire
4) Woodstock Soapstone
5) Mulciber
6) Travis

The two top innovation scores went to a Danish stove and a German stove.  First place went to the Hwam Autopilot stove with its onboard computer and oxygen sensor. If testing lasted many hours, not just 15 minutes, these features would have likely helped the stove receive higher overall points. The stove also alerts the homeowner to the optimum time to reload and how much wood to reload. There is no control on the stove for users to adjust; they can simply load it and leave, knowing that the stove will do the rest.

The IntensiFire claimed the number 3 spot because it is a relatively simple, elegant solution for old, uncertified stoves. And Mulciber, the University of Maryland stove, took 5th place with a pressurized, fan driven combustion chamber and co-axial stack.

AFFORDABILITY


1) Woodstock Soapstone
2) Walker Stoves
2) IntensiFire
4) SmartStove
5) Travis
6) Intercontinental

Tom Morrissey’s hybrid Ideal Steel from Woodstock Soapstone is clearly a great value given its size, BTU output and performance. The company has committed to retail it for $2,000 and hopefully that doesn’t mean it’s a loss leader for the company. The Walker stove, a hybrid rocket stove that can be made with more thermal mass, also impressed the judges and has lots of potential to get on the market for less than $2,000.

This is the one area that the SmartStove appears in the top 6 rankings for its control system that can automate virtually any non-catalytic stove, significantly reducing its overall emissions for about $200 on top of the stove price.

PARTICULATE MATTER EMISSIONS
Mulciber

1) Mulciber
2) Intercontinental
3) Woodstock Soapstone
4) Wittus
5) Ecolabel Tile Stove
6) Travis

In the emissions category, seen by many experts as the key goal of high performing stoves, the underdog team from the University of Maryland took a surprising first place with a least one run where the PM 2.5 particulates were so low they were barely measurable. The students used a home-made catalyst and a unique self-cleaning particulate trap to achieve these results.

Again, the masonry stoves did very well along with the other catalytic stoves. The Travis Cape Cod has the lowest PM measurement of any certified wood stove at .45 grams an hour, one tenth of the more stringent Washington State limit, when tested with dimensional lumber.

EFFICIENCY

1) Wittus
2) Tulikivi
3) Ecolabel Tile Stove
4) Mulciber
5) Intercontinental
6) IntensiFire

Wittus
All the masonry stoves performed extremely well in the efficiency category, even though the top spot went to the downdrafting German Wittus stove that has a relatively small firebox. Since efficiency is measured using a stack heat loss method, the masonry stoves could lose most of their heat to the masonry mass before exiting the chimney. The University of Maryland’s Mulciber stove often had stack temperatures around 200 degrees, half that of some of the other stoves.

What is surprising here is that neither the Woodstock Soapstone nor the Travis placed in the top 6, even though they have 3rd party efficiency testing that rates them around 82% in the EPA wood stove list. This could mean that these other stoves could hit efficiencies even higher, around 84 or 85% using the EPA’s B415.1 test, or it may simply mean that the efficiency testing and methodology at the Decathlon favored masonry stoves or was not good enough to measure very minor differences between very efficient stoves.


Travis
MARKET APPEAL

1) Travis
2) Wittus
3) Woodstock Soapstone
4) Ecolabel Tile Stove
5) Hwam
6) Tulikivi

The more polished stoves that were already in production won out here, with the catalytic and masonry stoves vying again for top spots. The judges appeared to vote based on what they thought was likely to appeal to the average consumer based on aesthetics, without regard to price.

CARBON MONOXIDE EMISSIONS

1) Travis
2) Woodstock Soapstone
3) Tulikivi
4) Tile Stove
5) Intercontinental
6) IntensiFire

Again, this category was a battle between the catalytic stoves and the masonry stoves, with the catalytic stoves taking the top spots. The University of Maryland team also used a catalyst but insufficient air on at least one run hurt their CO levels. It is noteworthy that the IntensiFire made it into the top 6, given that it used a very simple, affordable change to an old, uncertified stove.


11 comments:

  1. I would like to see the actual test results for all the contestants.

    ReplyDelete
    Replies
    1. We originally wanted to have complete transparency with all the testing results, but in consultation with judges and teams, we decided to give raw data to each team for their tests, and they are free to share it as they wish. More analysis will be coming out that is more technical than anything we can do at the Alliance for Green Heat.

      Delete
  2. Me too... However we are the only company I know that actually has a testing PDF with this information right on our website. www.lamppakuuma.com

    ReplyDelete
  3. How did the University of Maryland stove get 5th in innovation when they were the only ones to do anything new? I notice they didn't place in Carbon Monoxide Emissions either, a category that isn't even listed on the judging page.

    I think the kids got cheated.

    ReplyDelete
    Replies
    1. I was surprised by this too, but other teams had new stuff as well. In fact, 3 teams were working with ClearStak, which provided some of the same controls that the University of MD team was working with. I think some of the judges wanted to see innovation that performed well. Their stove didn't hold up well under rigorous testing but clearly had lots of potential. As the organizer, but not a judge, I can't speak for how and why judges scored as they did, but they are a very thoughtful group of people.

      Delete
  4. yeah I'm confused too. where did carbon monoxide emissions count in the judging process? that's not listed at all

    ReplyDelete
    Replies
    1. The judges added the carbon monoxide evaluation and informed the teams they were testing for that. It turned out to be valuable information for the teams to have and help them more clearly understand how their stoves were performing and how to improve them.

      Delete
    2. I will back John up here and say the testing was very valuable in regards to carbon monoxide. I hadn't had instrumentation on The IntensiFire prior to the Decathlon and was shocked at the CO emissions at parts of the combustion cycle as I tuned the stove. CO is wasted energy just like smoke and I am now armed with the tools to eliminate it.

      Delete
  5. It would be most helpful and educational to have the actual scoring results instead of general judging results. Could you publish the emissions results at least?

    ReplyDelete
  6. Will - We are still working on this and there will be more data and analysis coming out. As I mentioned in some posts above, we initially intended to have all results public immediately, the day of testing. Next time, if we do it again, we will figure out a way to do this. Testing can be quirky and its easy to have a bad treat run, and part of that can be the fault of the testers or the testing equipment. Publish that data can be very detrimental to a stove maker who has invested a lot. We did not want to set back the efforts of these teams, many of whom were operating on a shoestring budget. But we will figure out a way to publish some of the parameters to give everyone a sense of the range of data we were getting and how to interpret it. We did not get grams per hour, or even efficiency data the way EPA measures it. So, we also didn't want lots of data that contradicts or confuses things. Check back in January to see what we can release. The judges are working on this - its not just the decision of the Alliance for Green Heat. -- John

    ReplyDelete
  7. Still waiting for the actual test results!!!

    ReplyDelete